Installation Manual

PRELIMINARY

String Optimizer V1500-30 Series

Installation Manual: 57070016-1

v20201023

General Safety

Installation and maintenance should be performed only by qualified persons. Installers and

maintenance personnel assume the risk of all injury that might occur during installation or

maintenance including, without limitation, the risk of electric shock. Follow your safety

procedures and protocols.

All electrical installations must be done in accordance with the local and National Electrical

Code ANSI/NFPA 70; Canadian Electrical Code, Part I; or the applicable standards, codes,

and regulations for your region.

Failure to follow this manual will void warranty.

The Ampt product contains no user-serviceable parts. All repairs and maintenance should

be handled in accordance with the instructions and terms contained in the product

warranty.

Before installing or using the Ampt optimizer, read all instructions and safety messages on

the optimizer and in this manual. Follow the safety precautions for this product as well as

the other components in the PV system.

PV modules produce electrical energy when exposed to light and thus can create an

electrical shock hazard. Wiring of the PV modules should only be performed by qualified

personnel.

NOTICE

Opening the optimizers, performing any other service to the optimizers, or

using the optimizers in a way that is not specified by the manufacturer voids

warranty.