User Manual And Parts

42
EN
USER NOTE
This pubblication shall consist of n°59 pages as specied below:
• Title page with Notes for the User (no print back);
• Index of contents, pag. 3;
• From pag. 3 to pag. 59: progressive numeration.
The maufacturer reserves its right to bring changes to the information indicated in the manual without
the obligation to communicate it in advance, as long as they don’t alter safety.
PROBLEM CAUSES SOLUTION
Pressing the green or
white button the machine
starts, but will not turn the
operation light on.
Defective indicator. Do not use the machine with
light indicator off; consult
promptly the customer
service.
The machine starts but
vibrates, the motor is very
hot and there is bad smell.
Defective motor or
transmission.
Do not use the machine,
consult promptly the
customer service.
The machine under load
slows or stops.
Defective transmission. Consult the customer
service.
Excessive resistance at
cutting of the product.
The blade is blunt. Sharpen the blade.
The slices are ragged
and/or irregularly shaped.
The blade is blunt. Sharpen the blade.
Blade excessively worn. Consult the customer
service.
The blade sharpening is
unsatisfactory.
Worn wheels. Replace the wheels; Call
the customer service.
The product tray does not
slide.
Insufficient guides
lubrication.
Lubricate.
Pressing the black or red
button the machine does
not stop.
Defective electrical control
circuit.
Stop the machine pulling
the plug from the network
and call customer service.
43
*
230V - Hz 50
0
N
L
1
EN
Only for personnel authorized by the manufacturer
ELECTRICAL SCHEME TG 03SE
for versions
F 195 - S 220 - F 250 ES - S 220 AF - F 250 E - F 275 E - F 300 R
CONDENSER
tighten on slicer’s chassis
yellow-green
brown
blue
POWER
220V-50Hz
MOTOR
* MOD. 195 MF.6,3
* MOD. 220
* MOD. 250E MF.8
275E
300R
MF.