User Manual

OCCURRENCE OF DEFECTS
- In case of malfunction of the equipment before calling for service, check if the machine has
the following problems:
1 - If the machine does not turn on: Make sure the machine voltage corresponds to the
location, make sure the emergency button is pulled out (working position) and make sure the
phase sequence (only three-phase machines) are in the correct order.
2 - Se a máquina estiver lenta: Check the pressure of the straps.
- If there really is a need to activate the GPaniz Technical Assistance if the equipment is not
working as specified, have the invoice and the Instruction Manual to hands and contact the
GPaniz Service. This will provide you insight into small problems that may eventually occur
in your equipment and will show you the closest assistant.
- To facilitate spare parts, always quote the reference of the machine in this case DC-04.
- Before cleaning the appliance switch off the main switch and remove the plug.
- Never use metal accessory (knife, spoon, etc.) not to attack the stainless steel parts.
- To clean, we recommend using a damp cloth with mild soap.
- Never use water hose as this may cause short circuit and damage the electrical
components such as motor and safety items.
- Cleaning your equipment should always be made after use.
- Do not use abrasive products, only mild soap.
- This product should not be cleaned with water jet.
- The machine can not be submerged for cleaning.
CLEANING
Pg.09
MAINTENANCE
Regular maintenance of equipment prevents premature wear of parts that work together,
such as belts. In addition to maintenance, you must do some checks:
- Check for wear and tightness (tension) of the motor belt every 100 hours.
- An electrician must provide electrical service as specifications of local and national laws.
- If the power cord is damaged, it must be replaced by authorized manufacturer or
service with a special power cord available from the manufacturer or authorized service,
in order to prevent accidents.