User Manual

PRODUCT RECEIVING
Upon receiving the product, and recommend a thorough inspection for damage arising
from transportation, such as:
- Wrinkled and scratches in the paint;
- Break into pieces;
- Lack of parts through the violation of the pack.
The following procedures must be carried out to improve user safety:
- Install the equipment in a well ventilated area;
- Installation of the equipment must be on a flat surface;
- Leave a space of at least 15 cm around the equipment;
- The metal parts are conductors of heat, so that before starting any
maintenance, make sure the machine has cooled completely;
- Check if the mains voltage is the same as their teams;
- Check the pressure of the hydraulic network. If greater than 4 bar
(approximately 40 meters water column), the valve pressure regulator
installed;
- Never use extensions or "T" for the connection of equipment;
Qualified professional if it does not fit with these procedures, hiring for
achievement. Call 0800-704-2366 and contact technical support.
Pg.05
INSTRUCTIONS FOR USE
TECHNICAL SPECIFICATIONS
The mill MFP- 80 is distinguished by its advanced design, it is made of SAE 1020 steel
sheet with paint (epoxy), optional stainless steel.
The mill specifically serves to turn bread flour toast, he is capable of grinding rolls 80 per
hour, and is indispensable in bakeries and the like.
TECHNICAL SPECIFICATIONS
DIMENSIONS
(AxLxC)
665x355x275 mm
PRODUCT
MONHO DE PÃO
MODEL
WEIGHT
POWER
CAPACITY
CONSUMPTION
MFP-80
22 kg
1 CV
0,85 kw/h
80 kg/h
Description
Machine
MFP-80
MFP-80
71540
71651
Unipolar Mini Circuit Breaker 10A curva C
Unipolar Mini Circuit Breaker 20A curva C
Code