User Manual

- Before cleaning the appliance pull the plug.
- Never use metal accessories (knife, spoon, etc.) not attack stainless steel parts.
- For cleaning, we recommend using a damp cloth with mild soap. Never use water hose, as it
could cause a short circuit and damage the electrical components such as motor and safety
items.
- Cleaning your computer you should always be done after use. Do not use abrasive only soft
soap.
- This equipment should not be cleaned with water jet.
- The computer can not be immersed for cleaning.
CLEANING
Pg.07
Regular maintenance of equipment prevents premature wear of parts working together. In
addition to maintenance, it is necessary to make some checks:
- An electrician must provide electrical service as specified in local and national laws.
- If the power cord is damaged, it must be replaced by the manufacturer or authorized
service center with special cord available from the manufacturer or authorized service in
order to prevent accidents.
MAINTENANCE:
OCCURRENCE OF DEFECTS
- In the event of equipment malfunction before calling for assistance, check if the machine
has the following problems:
1 - If the machine does not turn on: Check if the voltage of the machine coincides with the
establishment.
- If there really is a need to trigger the GPaniz Technical Assistance, if your computer is not
working according to specifications, they have the invoice and the instruction manual
handy and contact Customer Service G.Paniz. This will provide an idea of the small
problems facing his team and will indicate the closest assistant coach.
- To provide spare parts, always indicate the reference of the machine, in this case MFP-
80.
To change the display (08 article page 08.) Follow these steps:
Step 1: Keep the feed nozzle by removing the four M6 screws holding;
Step 2: Remove the protections of entry (Article April 08 p.) By loosening the screw M6;
Step 3: Remove the filter by loosening the two M8;
Step 4: To reassemble do the reverse steps.
NOTE: Changing the screen should be performed only by qualified and authorized personnel.