User`s guide

PM-9800 MAINBOARD MANUAL
4
MAINBOARD DIAGRAM
A
B
C
D
E
A
ZIF SOCKET
Plug the processor into this socket.
Make sure the cpu is correctly aligned
before you insert it.
AT POWER SUPPLY
CONNECTOR
Plug the dual connectors from the
power supply directly into the board
connectors. On most power supplies,
you must orient the black (ground)
wires such that all the black wires on
both connectors are in the middle.
B
C
ATX POWER SUPPLY
CONNECTOR
Plug the single 20 pin connector into
the board connector. It should only fit
in one direction.
AT STYLE KEYBOARD
CONNECTOR
Plug a standard 5-pin female DIN key-
board connector into this port.
PS/2 MOUSE CONNECTOR
Plug a PS/2 mouse connector into
this port.
PS/2 MOUSE HEADER
Use this when you want to relocate
the PS/2 mouse connector plug off the
mainboard
D
F
E
F