Specifications

SYST:CONS:BAUD
This command sets and queries the RS-232 interface baud rate setting.
Command Syntax
Parameters
Example
Query syntax
Returned Parameters
Related Commands
SYSTem:CONSol:BAUD <baudrate>
<baudrate>: RS-232 baud rate value
SYST:CONS:BAUD 115200
SYSTem:CONSol:BAUD?
<NR1>: Represented the baud rate value
None
SYST:CONS:EOS
This command sets and queries the RS-232 interface EOS mode.
Command Syntax
Parameters
Example
Query syntax
Returned Parameters
Related Commands
SYSTem:CONSol:EOS <NR1>
<NR1>: 0 – None
1 – CR
2 – LF
3 – CR + LF
SYST:CONS:EOS 1
SYSTem:CONSol:EOS?
<NR1>: Represents EOS mode
SYST:EOS
SYST:DEF:OUTP
This command sets and queries the power on output status.
Command Syntax
Parameters
Example
Query syntax
Returned Parameters
Related Commands
SYSTem:DEFault:OUTPut <NR1>
<NR1>: 0 | 1
0 -- Power ON output status always OFF
1 -- Power ON output status same as the Power OFF status
SYST:DEF:OUTP 1 SYST:DEF:OUTP 0
SYSTem:DEFault:OUTPut?
<NR1>: Represented the default power on output status
None
SYST:EOS
This command sets and queries the end of string (EOS) mode for read back of current interface.
Command Syntax
Parameter
Default Value
Example
Query Syntax
Returned Parameter
Related Commands
SYSTem:EOS <NR1>
<NR1>: 0 – 3, end of string (EOS) mode
0 NONE *
1CR
2LF
3 CR + LF (For RS-232 interface only)
3
SYST:EOS 1
SYSTem:EOS?
<NR1> represented EOS mode
NONE
<Note> *: If the end of string mode is set to 0 using this command, the returned value is in binary format if
users communicate the power supply using National Instrument’s Measurement and Automation software.
6-32