Specifications

COMMAND INDEX AND ERROR CODE FOR “SYST:ERR?” QUERY
Command index for SYST:ERR? query:
*RST 0 SERI 32 SYST:CHAN 118
*CLR 1 *VRF 34 CAL:CURR:LEV 119
VOLT:PROT:CLE 2 LIST:CURR 40 CAL:VOLT:LEV 120
CURR:PROT:CLE 3 LIST:CURR:TIME 41 SYST:SLOPE 121
OUTP:PROT:CLE 4 LIST:VOLT 42 SYST:OFFSET 122
CAL:STAT 5 LIS:VOLT:TIME 43 CHAN:VERS 123
VOLT:PROT:STAT 6 CAL:SAVE 50 PROT:CHAN 125
CURR:PROT:STAT 7 CURR:CAL:SAVE 58 TRAC 126
OUTP 8 VOLT:CAL:SAVE 59 TRAC:CLE 127
OUTP:REL 9 UND:PROT:CLE 70 PARA:CLE 171
OUTP:REL:POL 10 MEAS:VOLT(VOUT) 97 PARA:CURR 172
LIST:VOLT:STEP 11 MEAS:CURR(IOUT) 98 PARA :GROU 173
LIST:CURR:STEP 12 ABOR 101 PARA:OUTP:TRIG 174
LIST:VOLT:STAT 13 *OPC 102 PARA:OUTP:REL 175
LIST:CURR:STAT 14 CAL:VOLT 103 PARA:STAT 176
*SAV 16 *IDN 105 PARA:VOLT 177
UND:PROT:STAT 17 *TST 109 PARA:OUTP:REL:POL 178
SHUT:DOWN 19 *ESR 110 *ESE 180
VOLT(VSET) 20 *TRG (TRIG) 111 SYST:CHAN:MAX 181
VOLT:TRIG 21 SYST:ERR 112 MEAS:DEL 182
CURR(ISET) 22 SYST:VERS 113 SYST:EOS 183
CURR:TRIG 23 STAT:OPER 114 *SRE 184
VOLT:PROT(:LEV) 24 STAT:QUES 115 *STB 185
TRIG:DEL 25 CAL:CURR 116 STAT:QUES:ENAB 186
LIST:COUN 31 MODEL 117 SYST:DEF:OUTP 187
Error code for SYST:ERR? Query:
01: RS485 busy, the master controller is communicating with power supply.
02: RS485 error, power supply receives command error.
03: RS485 error, SPLR-MC1 controller time out error. Controller sends data to power
supply but no response.
04: RS485 error, output voltage and current measurement errors.
20: GPIB error, GPIB command parameter error.
30: GPIB error, power supply command is not selected or missed.
50: GPIB error, GPIB command not in the list.
60: GPIB error, try to send a command to a channel already in a parallel group.
70: GPIB error, command error during parallel operation.
6-44