Specifications
FRONT PANEL KEYPAD DEFINITION
VOLT CURR OV/TIME UTILIY
7 8
9 LOCAL
VLIST ILIST RANGE
4 5 6
RELAY
OUT ON/OFF OVP ON/OFF OCP ON/OFF
1 2
3 CHANNEL
VLIST ON/OFF ILIST ON/OFF
RESET
0
x
CLEAR ENTER
Most soft keys have dual functions. The first function is mode entry as described by VOLT, CURR right above
the key. Once in a mode entry, use these keys as numeric keypad to enter the desired number. Press ENTER
key to accept the number keyed or CLEAR key to clear the number.
FRONT PANEL KEYPAD FEATURES
1. Press this key to enter a new voltage setting in flashing bracket or to display
the present voltage setting. Numeric key for 7. And also select
voltage calibration key in calibration mode.
2. Press this key to enter new current setting in flashing bracket or to display
the present current setting. Numeric key for 8. And also select current
calibration key in calibration mode.
3. Press this key to enter new over voltage protection value in flashing
bracket or to display the present over voltage protection value. This
key can also be used after pressing #4 key or #5 key to alter time
interval in millisecond for STEP programming. Numeric key for 9.
And also select over-voltage calibration key in calibration mode.
4. Reset is similar to a warm boot-up for the computer. If in entry mode,
pressing this key will clear the number entered or return to the previous
mode. This key can also be used to disable an over-voltage condition.
5. Press this key to enter utility menu to change GPIB address, RS-232 speed,
and RS-232 response speed or loop count of step. (These functions will be
explained in details in the display section). Use #8 key and #2 key to scroll
to the desired sub-menu to be change and use #4 key and #6 key to alter the
setting in the sub-menu.
6. Press this key to do current step programming. Use #8 key and #2 key
to scroll up to 20 current stepping value. Use #7 key to change current
stepping value at that step. Use #9 key to change stepping time
interval at that step. Numeric key for 5.
9
OV/TIME
CLEAR
RESET
LOCAL
UTILITY
5
ILIST
7
VOLT
8
CURR
1-4