Specifications

7. (Optional) High/Middle/Low range selection for constant current mode.
This key also scrolls menu options. Numeric key for 6.
8. Press this key to turn the output on or off. When the output is disabled,
the LCD displays “--OUTPUT OFF--“.
9. Press this key to start and stop voltage stepping. Numeric key for 0.
10. Press this key to enable and disable over voltage protection. If over
voltage protection is enabled, a  is indicated by OVP.
Numeric entry key for 2.
11. Press this key to enable or disable over current protection. If over
current protection is enabled, a  is indicated by OCP.
Numeric key for 3.
12. Press this key to start and stop current stepping. Numeric
enter for decimal point.
13. RELAY (Optional) Press this key to activate the isolation relay menu.
14. Press this key to do voltage step programming. Use #8 key and #2 key
to scroll up to 20 voltage step. Use #7 key to change voltage value at
that step. Use #9 key to alter time stepping interval at that step.
15. (Optional) Channel function is to select multiple channels (including
the master unit to be programmed.
16. Enters the number keyed.
6
RANGE
4
VLIST
1
OUT ON/OFF
0
VLIST ON/OFF
2
OVP ON/OFF
3
OCP ON/OFF
z
ILIST ON/OFF
CHANNEL
ENTER
1-5