Specifications

In addition to the above, you must include return freight funds if you instrument is out of warranty
and are fully responsible for all documents, duties, tariff, and deposits.
PACKAGING FOR SHIPPING OR STORAGE
Instructions to prepare the instrument for shipping or storage.
1- When returning the unit or sending it to the service center, attach a tag to the unit stating its model
number (available at the front panel label) and its serial number (available at the rear panel label).
Give the date of purchase and an invoice number, if you have it, as well as a brief description of the
problem.
2- For storage or shipping, repack the power supply in its original box. If the original box is not
available, seal the instrument in a plastic bag and pack it in a 200 lb. (90Kg) test corrugated
cardboard carton large enough allow 3 inches (76.2mm) of cushioning material to surround the unit
or use a material such as foam slabs or chips or an appropriate wooden crate. Please consult with
AMREL shipping department for proper packing material and handling.
3- Mark the address of the service center and your return address carton.
4- For storing, no more than two cartons high. The storage temperature should be between -40qC to
70qC.
LOCATION, MOUNTING, AND VENTILATION
Power supply is designed for rack-mounted or bench top applications.
RACK MOUNTING INTALLATION:
1- Use the integral rack-mount ears at both sides of the front panel to install the power supply in a rack
mount application.
2- Provide adequate support for the rear of the instrument without obstructing the ventilation inlets on
the sides of the unit. Use a support bar at the bottom or rear of the unit. Follow the rack-mount
manufacturer’s instructions to install the support bar. (NOT INCLUDED)
VENTILATION:
Whether you place the power supply in a rack or on a bench, allow cooling air to reach the ventilation inlets
on the sides of the instrument and allow 4 in. (101.6mm) of unrestricted air space at the rear of the unit for the
fan exhaust. Any ventilation space at the top and bottom of the supply will further lower internal operating
temperatures.
2-3