Specifications

(INPUT MODE)
SETTING VOLTAGE
To locally program the voltage (VSET), press "VOLT", enter the value and press "ENTER". For example,
if one wished to set a voltage of 3.99, press:
VOLT 3
x
9 9 ENTER
The LCD displays 3.99 V and the unit returns to metering mode.
SETTING CURRENT
To locally program the current (ISET), press "CURR" and enter the value and then press "ENTER". For
example, if one wishes to set a current of 1.69 amps, press:
CURR 1
x
6 9 ENTER
The LCD display 1.69 and the unit returns to metering mode.
OVER VOLTAGE PROTECTION
The power supply has an over voltage protection (OVP) feature to guard against abnormal operating
conditions such as voltage overshoot. When the supply’s output voltage exceeds a threshold voltage, the OVP
is activated, and the unit disables the output. The LCD will indicate the condition.
SETTING THE OVER VOLTAGE THRESHOLD
To locally program the threshold voltage press "OV/TIME", enter the value and press "ENTER". For
example, to program an over voltage value of 4.50V, press:
OV/TIME 4
x
5 0 ENTER
When output voltage exceeds 4.50V, OVP is triggered, OVP enunciator is blinking, and the output is
disabled.
3-2