Specifications

UTILITY MENU
Follow simply step below for Utility function.
1. Main menu as show when turned the power switch “ON”.
2. Press UTILITY key to advance to use key #8 as up and #2 as down
to change MAP group from 0 – 3 to view the status of the unit. Press CLEAR key to
back to main menu.
3. Press #6 key once after pressed UTILITY key to advance to use
key #8 as up and #2 as down to change the GPIB address from 0 – 31 address. Press
ENTER key to accept the value then press CLEAR key to back to main menu.
4. Press twice #6 key after pressed UTILITY to advance to use
key
#8 as up and #2 as down to select (0-31 channel). Press ENTER key to accept the value
then press CLEAR key to back to main menu.
5. Press three times #6 key after press UTILITY to advance to use
key #8 and #2 to select (Output On, Output Off, or Default Set by manufacture). Press
ENTER key to accept the setting then press CLEAR key to back to main menu.
(OPTIONAL)
6. Press four times #6 key after pressed UTILITY to advance to
use key #8 as up and #2 as down to select (9600 bps / 2400 bps / 19200 bps). Press
ENTER key to accept the value and press CLEAR key to back to main menu.
7. Press five times #6 key after pressed UTILITY to advance to
use key #8 as up and #2 as down to select (NONE / CR / LF / CR+LF). Press ENTER
key to accept the EOS Code then press CLEAR key to back to main menu.
8. Press six times #6 key after pressed UTILITY will back to step 1 (System Status).
Also you may press #4 key to back to previous function.
* Note: Power on default function is an optional feature.
OUTPUT OFF
01 °
TST 7FFFFFFE
MAP0
--------^
GPIB ADDRESS
5 <
SYSTEM CHANNEL
1 <
POWER ON DEFAULT
DEFAULT SET <
RS - 232 SPEED
19200bps <
EOS CODE
CR + LF <
4-6