Specifications

LCD STATUS ANNUNCIATOR (PD-E > 600W Models)
LIQUID CRYSTAL DISPLAY:
35.00V 9.580A
CC
RMT OVP
OCP
<OUTPUT OFF>
CV
CC
OVP
OCP
[01]
87654321








LCL
5
6
2
1
3
4
FIGURE 5.2 PD SERIES
<NOTE :>
The LCD displays real time output Voltage/Current & mode status. These messages are viewed in either local
or remote mode.
LCD DESCRIPTION REFERS TO FIGURE 5.2
1. CV: When this indicator is on, the unit is operating in a constant voltage mode.
2. CC: When this indicator is on, the unit is operating in a constant current mode.
3. OVP: When this indicator is on, the unit is operating with over voltage protection
enabled. This prevents the output voltage from exceeding a preset voltage level.
4. OCP: When this indicator is on, the unit is operating with over current protection
enabled. This prevents the output current from exceeding a preset current level.
5. Channel indicator: The power supply indicates which channel it is currently
displaying by having ^ instead of _ on top of the number. (Not available for this
PDS40-30AR).
6. Mode indicator: This status annuciator indicate if the PD is in LCL (local) mode or in
RMT (remote) mode.
5-5