Specifications

UTILITY MENU
Follow simply step below for Utility function.
1. Main menu as show when turned the power switch “ON”.
2. Press UTILITY key to advance to use key #8 as up and #2 as
down to
change the GPIB address from 0 – 31 address. Press ENTER key to accept the value and
press CLEAR key to back to main menu.
3. Press #6 key after pressed UTILITY to advance to use key #8
as up and #2 as down to select (1200 bps or 2400 bps or 9600 bps). Press ENTER key to
accept the value and press CLEAR key
to back to main menu.
4. Press twice #6 key after pressed UTILITY to advance to use
key #8 as up and #2 as down to select (NONE or CR or LF or CR+LF). Press ENTER key
to accept the value and press CLEAR key to back to main menu.
5. Press three times #6 key after pressed UTILITY to advance to
use key #8 as up and #2 as down to select (0-255 count). Press ENTER key to accept the
value and press CLEAR key to back to main menu.
6. Press four times #6 key after pressed UTILITY to advance to
use key #8 as up and #2 as down to select (0-30 channel). Press ENTER key to accept the
value and pres CLEAR key to back to main menu.
7. Press five times #6 key will back to GPIB ADDRESS menu. Also you may press
#4 key to back to previous function.
°X --OUTPUT OF--
L [1] ^_ _ _ _ _ _ _ LCL
X GPIB ADDRESS
5 <
X RS-232 SPEED
9600 bps <
X EOS CODE
CR + LF <
X LOOP COUONT OF ST
247 <
X SYSTEM MAX CHANN
1 <
5-25