Specifications

Using AMREL software tools to communicate with your power supply via Ethernet interface.
American Reliance, Inc. provides free software tools for you to configure and communicate with your
power supply. Please contact AMREL customer support for details.
One of the most convenient tools for you to choose is AMREL eTool4-ConfigTool. This software tool
automatically checks all connected power supply units on Ethernet when both PC and the power supply
units are connected to Ethernet, along with basic information of the power supply units, such as model
number, maximum voltage and current, and so on. Also automatically set Ethernet configurations for all
connected power supply units if your network is DHCP enabled. This software tools comes with your
purchase of the unit, or you can download it from AMREL ftp site. Please contact AMREL customer
support for details or refer to the following.
Please do the following steps to download, install and use eTool4-ConfigTool:
1. Installation:
1) Copy all the needed files to a local computer from E-Power folder at AMREL ftp
site: ftp://66.121.66.205
(need a user name and password from AMREL
authorization.
2) Run setup.exe file and follow the on screen instructions.
3) Choose “Start | Programs (or All Programs for Windows XP) | Config Tool” to run
the program.
2. Configure Instrument:
1) When the program first runs, the software automatically search the connected
instruments and the following three panel show up:
6-5