Specifications

TRACKING SELECTION MODE 5-13
FRONT PANEL LOCK OPERATION 5-14
PROFILE SAVE AND LOAD 5-14
STEPPING MODE 5-15
LIST CYCLE 5-15
FRONT & REAR PANEL DESCRIPTION (PD-A > 600W MODELS) 5-16
FRONT PANEL KEYPAD DEFINITION (PD-A >600W MODELS) 5-17
VFD STATUS ENUNCIATOR (PD-A > 600W MODELS) 5-19
REAR PANEL FEATURES 5-20
LOCAL OPERATION (PD-A > 600W MODELS) 5-21
SETTING VOLTAGE 5-22
SETTING CURRENT 5-22
O
VER VOLTAGE PROTECTION 5-22
SETTING THE OVER VOLTAGE THRESHOLD 5-22
ENABLING / DISABLING OVER VOLTAGE PROTECTION 5-23
OVER CURRENT PROTECTION 5-23
ENABLING / DISABLING OVER CURRENT PROTECTION 5-19
ENABLING / DISABLING OUTPUTS 5-19
UTILITY MENU 5-20
CONSTANT CURRENT RANGE SELECTION (IF APPLICABLE) 5-21
STEPS TO VIEW “*IDN
?” INFORMATION FROM THE FRONT PANEL 5-21
STEPS TO SET THE EOS MODE FROM THE FRONT PANEL 5-21
STEP TO VIEW SELF-TEST RESULT 5-21
REMOTE SENSE 5-22
REMOTE SENSE CONFIGURATION 5-22
REMOTE SENSE CHARACTERISTICS 5-23
ISOLATION RELAY FUNCTION 5-24
TTL SHUTDOWN 5-30
SIX: REMOTE OPERATION 6-1
INTRODUCTION 6-1
REMOTE INTERFACE FUNCTIONS 6-1
ADDRESS SETTING FOR THE REMOTE INTERFACE 6-1
GPIB CAPABILITIES OF THE POWER SUPPLY 6-2
RS-232 CAPABILITIES OF THE POWER SUPPLY 6-2
ETHERNET CAPABILITIES OF THE POWER SUPPLY (E & AK OPTION ONLY) 6-3
ETHERNET RETURNED DATA STRING FORMAT (E & AK OPTION ONLY) 6-8
COMMANDS LIST 6-8
SUBSYSTEM COMMANDS SYNTAX 6-9
NON-SCPI COMMANDS 6-11
IEEE 488.1 COMMA
NDS 6-11
DESCRIPTION OF COMMON COMMANDS 6-12
DESCRIPTION OF SUBSYSTEM COMMANDS 6-17
CALIBRATION SUBSYSTEM 6-17
CHANNEL SUBSYSTEM 6-21
CURRENT SUBSYSTEM 6-22
LIST SUBSYSTEM 6-24
MEASUREMENT SUBSYSTEM 6-27
OUTPUT SUBSYSTEM 6-28
STATUS
SUBSYSTEM 6-29
SYSTEM SUBSYSTEM 6-31
TRIGGER SUBSYSTEM 6-36
VOLTAGE SUBSYSTEM 6-37
NON-SCPI COMMANDS AND THEIR EQUIVALENT SCPI COMMANDS 6-38
IEEE 488.1 COMMANDS AND THEIR EQUIVALENT SCPI COMMANDS 6-40
STATUS REPORTING 6-41
SCPI GPIB COMMAND STATUS MODEL 6-42
vii