Specifications

*TST? Performs self-test and returns test result

SUBSYSTEM COMMANDS SYNTAX

ABORt Resets the trigger system to idle state

CALibrate

:CURRent

[:DATA] <channel> <value> Enters the current calibration value

:LEVel <channel> <n> Sets the current calibration point

:SAVe <channel> <n> Resaves current calibration data

:OFFSet <channel> <n> <value> Sets / Queries calibration offset value

:PASSword <channel> [<password>] Sets calibration password

:SAVe <channel> Saves new calibration constants

:SLOPe <channel> <n> <value> Sets / Queries calibration slope value

:STATe <channel> <bool> [<password>] Sets / Queries calibration state

:VOLTage

[:DATA] <channel> <value> Enters the voltage calibration value

:LEVel <channel> <n> Sets the voltage calibration point

:SAVe <channel> <n> Resaves voltage calibration data

CHANnel

:MODel? <channel> Returns model number

:SERial <channel> <serial-number> Sets / Queries serial number

:VERSion? <channel> Returns channel version

CURRent

[:LEVel]

[IMMediate] <channel> <value> Sets / Queries the output current level

:TRIGgered <channel> <value> Sets / Queries the current triggered level

:PROTection

:CLEar <channel> Resets latched current protection

:STATe <channel> <bool> Sets / Queries current protection state

LIST

:COUNt <channel> <count> Sets / Queries the number of times for a list

:CURRent <channel> <point> <value> Sets / Queries current value for a list point

:STATe <channel> <bool> Sets / Queries current list state

:STEP <channel> <n> Sets / Queries list step

:TIMe <channel> <point> <value> Sets / Queries current dwelling time for a list point

:VOLTage <channel> <point> <value> Sets / Queries voltage value for a list point

:STATe <channel> <bool> Sets / Queries voltage list state

:STEP <channel> <n> Sets / Queries voltage list step

:TIMe <channel> <point> <value> Set / Queries voltage dwelling time for a list point

MEASure

:CURRent? <channel> Returns current measured value

:DELay <n> Sets / Queries delay time for measuring

:VCOUT? <channel> Returns both voltage and current measured value

:VOLTage? <channel> Returns voltage measured value

6-9