Specifications

OUTPut
[:STATe] <channel> <bool> Sets / Queries output status
:PROTection
:CLEar <channel> Resets latched protection
:RELay
[:STATe] <channel> <bool> Sets / Queries output relay state
:POLarity <channel> <polarity> Sets / Queries output relay polarity
STATus
:OPERation
[:EVENt]? <channel> Returns the value of operation event register
:QUEStionable
[:EVENt]? <channel> Returns the value of questionable event register
:ENABle <channel> Enables / Queries the specific bit in the questionable
enable register
S
YSTem
:BACK <NR1> Sets / Queries system LCD backlight mode
:BUZZer <bool> Sets / Queries system buzzer mode
:CHANnel:MAXimum <NR1> Sets / Queries max # of channels in a system
:CONSol
:BAUD <baudrate> Sets / Queries RS-232 baud rate value
:EOS <NR1> Sets / Queries RS-232 EOS mode
:DEFault:OUTPut <NR1> Sets / Queries default power on output status
:EOS <NR1> Sets / Queries current interface EOS mode
:ERRor? Returns error number and string
:GPIB:EOS Sets / Queries GPIB EOS mode
:NET
:ADDRess Sets / Queries Ethernet IP address
:DHCP? Queries if the DHCP is enabled
:EOS Sets / Queries Ethernet EOS mode
:GATE Sets / Queries Ethernet default gateway IP address
:STATe? Queries Ethernet configuration state
SUBNet Sets / Queries Ethernet Subnet value
:PROT Returns value of Protect Event Status register
:VERSion? Returns the firmware version number
:INH:STAT <NR1> Sets / Queries Remote Inhibit (RI) shutdown mode
TRIGger
[:STARt]
[:IMMediate] Enables output trigger immediately
:DELay <channel> <value> Sets / Queries delay time for output trigger
VOLTage
[:LEVel]
[:IMMediate] <channel> <value> Sets / Queries the output
voltage level
:TRIGgered <channel> <value> Sets / Queries the voltage triggered level
:PROTection
:CLEar <channel> Resets latched voltage protection
[:LEVel] <channel> <value> Sets / Queries over voltage protection level
:STATe <channel> <bool> Sets / Queries over voltage protection state
6-10