Specifications

NON-SCPI COMMANDS
CURR:CAL:SAVE <channel> <n> Resaves current calibration data
MOD? <channel> Returns model number
PROT:CHAN? Returns protected channel number
SERI <channel> <serial-number> Sets / Queries serial number
SYST:CHAN <channel>
SYST:OFFSet <channel> <n> <value> Sets / Queries calibration offset value
SYST:SLOPe <channel> <n> <value> Sets / Queries calibration slope value
SYST:STATUS
TRAC
TRAC:CLE
VOLT:CAL:SAVE <channel> <n> Resaves voltage calibration data
IEEE 488.1 COMMANDS
IOUT? <channel> Returns output current
IOUT1? Returns output current for channel 1
IOUT2? Returns output current for channel 2
ISET <channel> <value> Sets current limit
ISET1 <value> Sets current limit for channel 1
ISET2 <value> Sets current limit for channel 2
ISET? <channel> Returns setting current value
ISET1? Returns setting current value for channel 1
ISET2? Returns setting current value for channel 2
OCP <channel> <bool> Sets over current protection state
OCP1 <bool> Sets over current protection for channel 1
OCP2 <bool> Sets over current protection for channel 2
OUT <channel> <bool> Sets output state
OUT1 <bool> Sets output state for channel 1
OUT2 <bool> Sets output state for channel 2
OVP <channel> <bool> Sets over voltage protection state
OVP1 <bool> Sets over voltage protection state for channel1
OVP2 <bool> Sets over voltage protection state for channel2
OVSET <channel> Sets over voltage protection level
OVSET1 Sets over voltage protection level for channel1
OVSET2 Sets over voltage protection level for channel2
OVSET? <channel> Returns over voltage protection level
OVSET1? Returns over voltage protection level for channel 1
OVSET2? Returns over voltage protection level for channel 2
STATUS? Returns status for both channel 1 and 2
VOUT? <channel> Returns output voltage value
VOUT1? Returns output voltage value for channel 1
VOUT2? Returns output voltage value for channel 2
VSET <channel> <value> Sets voltage level
VSET1 <value> Sets voltage level for channel 1
VSET2 <value> Sets voltage level for channel 2
VSET? <channel> Returns setting voltage value
VSET1? Returns setting voltage value for channel 1
VSET2? Returns setting voltage value for channel 2
6-11