User`s guide

BIOS Setup
25
IDE Channel 0 Slave Sub-Menu
Phoenix TrustedCore (tm) Setup Utility
Main
IDE Channel 0 Slave [None]
Item Specific Help
Type: [Auto]
Multi-Sector Transfers: [Disabled]
LBA Mode Control: [Disabled]
32 Bit I/O: [Disabled]
Transfer Mode: [Standard]
Ultra DMA Mode: [Disabled]
SMART Monitoring: Disabled
User = you enter parameters
of hard-disk drive installed
at this connection.
Auto = autotypes hard-disk
drive installed here.
CD-ROM = a CD-ROM
drive is installed here.
ATAPI Removable =
removable disk drive is
installed here.
F1 Help ↑↓ Select Item –/+ Change Values F9 Setup Defaults
Esc Exit ↔ Menu Enter Select ► Sub-Menu F10 Save and Exit
IDE Channel 0 Slave Sub-Menu Selections
You can make the following selections on the IDE Channel 0 Slave Sub-Menu.
Feature
Options
Description
Type
User
Auto
CD-ROM
ATAPI Removable
User = you enter parameters of hard-disk
drive installed at this connection.
Auto = autotypes hard disk drive installed
here.
CD-ROM = a CD-ROM drive is installed
here.
ATAPI Removable = removable disk drive
is installed here.
32 Bit I/O
Disabled
Enabled
This setting enables or disables 32 bit IDE
data transfers.