User's Manual

Video Door Phone User Guide
13
Chapter 4 : Configuring Video Door Phone
Finding Video Door Phone on Networks
This chapter describes how to configure your Video Door Phone
with Web User Interface. Before proceeds to configuration, you have
to install the Video Door Phone on the same network. The default IP
type setting of Video Door Phone is “DHCP Client”, it is a typical
network mode. There is a software utility on the bundled CD which is
able to help you finding “Video- phone & Door-phone” devices when
using dynamic IP address. Please execute following utility :
<CD>:\Searching Tool
You will see a window like Figure 12 on screen. This utility will search
whole network automatically when utility is activated, then it will show
search results. The search result as follows:
z MAC Address: This MAC is a unique number that provided by manufacturer.
z IP Address: Here shows the IP address of found Devices (Video Door phone).
z Device Name / Device Type: Here shows which type of devices are found. For example, you may find Video-phone/Door-Phone in
the same network.
<Reset Function> The default IP type setting of Video Door Phone is “DHCP Client “. There is a reset button on the back of the DP101
1. Pressing the reset button for one second=>DP101 will turns to Fix IP mode as "192.168.0.50" and reboot by itself.
2. Or pressing for 5 seconds =>Turns to DHCP mode as the default value and reboot by itself. The issued RFID Cards data will be kept,
but the Master Card1 data need to be set again.
Figure 12 : IP Address on LCD