User's Manual

Video Door Phone User Guide
15
System - Basic Settings
Device ID – This ID is a unique number that assigned by manufacturer.
Device Name – The field allows user to give a specified name for
identification such as “Smith Family”.
Date & Time – Here shows date and time set on this phone.
Set New Date & Time – These fields allow user to set correct date and time
according to the local standard. You may synchronize phone time to match
your PC by press “Sync with PC” button or save changed date and time.
Time Zone – Here allows you to select preferred time zone to fit your
location. You can enable the “Daylight-Saving” feature if needed.
Network Time Protocol – Enable this protocol allows the system to
calibrate the time with NTP server through Internet.
NTP Server Address – You may use your preferred NTP server by input new address here.
Calibration Schedule – You may select when that you wish to do this NTP calibration.
Auxiliary Light – This feature allows you to control internal door bell button and external lighting device via DO1(Digit Output 1).
z Service : You may enable or disable this function.
z Control Status : You can select turn on or turn off the external light when timer is started.
z Start Time : You may set start time here.
z End Time : You may set end time here.
z Device Location : The field allows user to give a device location for identification such as “West Outside light”.
Figure 14 : System Basic Settings