User's Manual

MANUAL FOR SYSTEM INTEGRATOR
A
MROAD TECHNOLOGY INC.
16
Dedicated Function Keys
Below is the description of dedicated function keys.
ITEM Description
Message
Press Message function key to read the records of
Alarm, Visitor, Call Records, and Community notice…
while you were out.
SpeedDial
Press the SpeedDial function key:
1. To set up your speed-dial names and numbers.
2. To make a speed-dial (video) call by pressing
number keypad.
Lighting
Two lighting devices can be connected to ID5101. Press this Lighting key to turn on both
lamps. The two lighting devices act in the order of “On-On”, “Off-On”, “On-Off”, “Off-Off” in
turn.
NOTE: The maximum current for Relay Board is 2 A.
Security
While the Security Area is On, press Security key and enter password (default: 1111) to
disable Security Area A, B, C, and D. Likewise, the lights on Security Area will become gray.
NOTE: User may scan RFID card on the RFID reader to turn off Security Area.
Dis-Alarm
When alarm is triggered, user may press this Dis-Alarm key to stop the alarm temporarily
for 30 seconds by default. (15/30/45/60 seconds set by Web UI)
Flash
While you are talking on phone, the door bell rings at the same time. User may press this
Flash key to switch phone calls between the phone call and door phone.
Dedicated Function Keys