User's Manual

Amroad Technology Inc.21
MANUAL FOR SYSTEM INTEGRATOR
Wall Lamp and RFID LED Indicators
On the top of the DB3100R’s front panel, there are white light LEDs for acting as Wall Lamp. When doorbell is pressed, wall lamp turns
on gradually and projects diuse light. When the conversation is ended, wall lamp turns o slowly.
The 3-color LED indicator is located under the doorbell botton for information and status of scanning RFID card.
LED COLOR STATUS DESCRIPTION
WALL LIGHT WHITE
ON
When Doorbell is pressed, wall lamp turns on gradually and projects
diuse light…
OFF When the conversation is over, wall lamp turns o slowly…
3-Color LED for
RFID SCANNING
(Front Panel) OFF When RFID module fails…
Solid White ON While RFID Module is ready…
YELLOW/
WHITE
Twinkle
(Green, White)
When RFID reader is sensing a RFID card…
GREEN Twinkle
Card is accepted and door will be open…
Twinkle for 3 times (0.5sec On, 0.5 sec O…)
RED Twinkle
Card is NOT accepted and door will NOT be open…
Twinkle for 3 times (0.5sec On, 0.5 sec O…)
BLUE
Register Master
RFID Card
Scan Master RFID Card for the rst time…
If it is successful, blue light twinkle 3 times (1sec On, 1 sec O…)
Scan Master RFID
Card to issue new
card
Aer scanning Master RFID Card, blue light will light for 10 sec-
onds. (Within 10 seconds, new card should be scanned on RFID
reader.)