User's Manual

Amroad Technology Inc.35
MANUAL FOR SYSTEM INTEGRATOR
Entrance Settings – Extensions
You may configure call services in this page:
Item Description
Called Party
Extension
Number
Fill in the extension number. When Door Bell button is
pressed, the device will dial to the extension number.
(The extension number or group that is assigned by IP
PBX.)
NOTE: In the Peer-to-Peer mode, you need fill in the
complete extension number and IP address. e.g.
102@10.3.1.128
Called Out Ex-
tension Num-
ber
Fill in the extension number. When ALARM is occurred,
the device will dial to the called party extension number.
(The extension number or group that is assigned by IP
PBX.)
Internal Alarm
Alarm will be
triggered while
stealing
This is a “Burglarproof” function.
Please disable this function when the device is not ready
or during the device is repaired.
Service You can enable or disable the function of “Alarm will be
triggered while stealing”.
Select Disable or Enable for alarm sound when the
alarm is triggered.
Notice Number
via Message
(SIP)
You may fill in the IP Video phone number here. The
device will inform the IP Video Phone when the internal
alarm is triggered.
Figure 26: Entrance Settings