Amrobt Sweeping Robot Product Manual
Table of Contents 1. Important Safety Information 1.1 Use Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 1.2 Battery and Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 02 2. Product Diagram 2.1 Robot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Important Safety Information This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure they do not play with the robot. Cleaning and maintenance shall not be performed by children without supervision. • Do not place anything on top of your robot. • Be aware that the robot moves on its own. Take care when walking in the area that the robot is operating in to avoid stepping on it.
2. Product Diagram 2.
Bumper Release Button Dust Collector Charing Entrance Infrared Sensor Anti-Drop Sensors Charing Contacts Universal Wheel Side Brushes Battery Pack Driving Wheels Main Brush Power Switch Dust Bin 04
2.
2.
2.
3 Operating and Programming 3.1 Notes Before Cleaning Before using Robot, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects. If the Robot passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf.
3.2 Quick Start 4 Install Side Brushes • Attach Side Brushes to the bottom of Amrobt by pressing a brush into each slot until it clicks. 1 Plug in the Charging Dock and place the remaining wire into the trunking at the bottom of the Charging Dock Note: Failure to place the remaining wire into the trunking, may cause Robot to become stuck while charging or cleaning. 2 Place the Charging Dock on a hard level surface and against a wall.
6 Start Cleaning Cycle • Press the 7 Pause power button once to wake up the robot. • Press the power button again to start a cleaning cycle (or on Remote Control). • To pause the robot during a cleaning cycle press the or press the button on the Remote Control. button • To resume the cleaning cycle, pressbutton again. • To send robot back to the Charging Dock, press If its battery gets low before finishing a cleaning cycle, robot returns to the Charging Dock to recharge. button on robot button.
3.3 How Amrobt Clean Your Home 2 Floor Mopping Cleaning Amrobt support wet mopping function, the robot can floor mops cleaning for your home. Amrobt continues this process until it has cleaned an entire level of your home. If its battery gets low before finishing a cleaning cycle, Amrobt returns to the Charging Dock to recharge. 1. Attach the cloth and fill the water tank with water. 1 Auto Cleaning • Working in random pattern for seamlessly and thoroughly clean.
Cleaning Preferences 5 Edge Cleaning After robot finishes cleaning the open areas of your floor, it uses Edge Clean to ensure that it has cleaned along walls and around furniture legs. If you prefer a quicker edge cleaning, press the button on Remote Control. 3 Spot Cleaning When you select Spot Cleaning, robot intensely cleans a localized area by spiraling outward about 3 feet (1 meter) in diameter and then spiraling inward to where it started.
3.4 Cleaning Schedule Amrobt has cleaning schedule settings which allow you to customize when Robot cleans your home. These settings are available through Remote control and APP. Note: Please make sure the Remote Control near by the Robot while setting the Clock or Schedule. 1 Set the Remote Control’s Time Long press button on Remote Control and then the hour section begins to flash in the time display setting window. 08:25 08:25 08:25 press or button to select the desired figures.
2 Setting Cleaning Schedule 08:30 00:00 Press button on Remote Control and long press button, the hour section begins to flash in the Clean-ing Schedule display setting window. Press or button to select the desired figures. Press the or button to select the minute or hour section (half an hour/ per press) Note: It maybe delays 15-30 seconds to start cleaning when at schedule time 3 Cancel the Cleaning Schedule Way1: Through setp 1 and step 2, set schedule time into 00:00. Way 2: Power off the robot.
3.5 APP Connecting 4. Click "confirm blink rapidly" and enter wifi password. Do not confirm after entering the password. 1. Downloade APP ① APP store, Searching: smart life ② Scan QR Code(network: 2.4G), downloade APP → 2. Register account by phone number or e-mail address 3. Add Device ① Make sure robot and yout phone share the ③ O n t h e l e f t s i d e : C l i c k s m a l l h o m e same WiFi appliance, And then click Robot Vacuum ② Click “+” to add your Amrobt cleaner 5.
6. Indicator Light Vary 7. When connecting finishes, you can edit the name of your robot. Click save and done. First, the light will blink rapidly with phone by WIFI The light will stop 5 seconds during connecting → → → The light no longer blinks but keep turn on ! Trouble shooting: If connecting fails, pls turn off power. Click retry and repeat above procedure 4,5,6 to connect. NOTE: Please ignore the tips on the phone .Follow our trouble shooting instruction. 8.
9. Schedule your Amrobot Add and choose time for your Amrobt, you can choose repeat every Monday or etc and make note for it. Clean: ON 10. If Amrobt doesn't work for a long time, it will turn to standby mode and interface will become dark. If you want it to clean, click , and dingdong rings.
4. Regular Robot Care To keep robot running at peak performance, perform the following care procedures. If you notice robot picks up less debris from your floor, then empty the bin, clean the filter and clean the rolling brush.
4.1 Emptying Robot’s Bin 1 Press dust bin release button to remove it Open dust bin door to empty it. 4.2 Cleaning Robot’s Filter 1 Remove filter by grasping the white tab.
4.3 Cleaning Robot’s Side Brush 2 Wipe the charging contacts on Robot and the Charging Base with a clean, dry cloth. 1 Remove the brush 2 Clean the brush and the brush stand, and reinstall the brush. 4.4 Cleaning Robot’s Cliff Sensors and Charging Contacts 1 Wipe Robot’s Cliff Sensors with a clean, dry cloth.
3 Clean the rolling brush with the provided cleaning tool or a vacuum cleaner. 4.5 Cleaning Robot’s Floor Tracking Sensor Use a clean, dry microfiber or soft cotton cloth to wipe any debris that has accumulated in the round sensor opening on the right side of the bottom surface. Do not spray cleaning solution directly into the sensor entrance. 4 Reinstall the rolling brush by inserting the fixed protruding 4.6 Cleaning Robot’s Rolling Brush end first and then clicking into place.
4.7 Battery and Charging Information Lithium Ion Battery Important: Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations.
Battery Removal 2 Reinstall the battery with the battery label and tabs facing up. Follow these instructions to remove and reinstall robot’s battery: 1 Unscrew the door and the two screws on the battery door, then remove. 3 Reinstall the battery door and the two screws. Take care not to pinch the side brush in the battery door when re-installing the battery.
5. Troubleshooting No. Problems Solution 1 The robot keeps moving backwards • • • • 2 The robot do not work • Turn on the power switch button. • Check the battery capacity, and charge the robot. Check again after full charging. 3 The robot do not recharge automatically • • • • 4 The robot cannot be recharged • Please use approved adapter and make sure adapter plugged. • When the robot is damaged, please do not use. Contact after sales.
Frequently asked questions Problems Solutions Amrobt cannot be activated. • • • • The remote control does not work. • Replace the batteries in the remote control. • Make sure Amrobt is turned on and fully charged. Note: Limited workable range distance is 5m/16.5ft. Amrobt stops working suddenly. You cannot schedule cleanings. Suction power is weak. Amrobt cannot be charged. Make sure the main power switch is in the ON position. Make sure the battery is fully charged.
Problems Solutions Amrobt cannot return to the Charging Base. • Remove objects within 3 ft/1 m to the left and right side and within 6 ft/2 m of the front of the Charging Base. When Amrobt is in the vicinity of the Charging Base (distance within 26ft/8M), it returns more quickly. However, if the Charging Base is located far away(distance over 26ft/8M ), Amrobt needs more time to return. Please be patient as it walks back. • Clean the charging contact pins. The rolling brush does not rotate.
7. Customer Service Dear customer, thank you for purchasing our products. If the appliance should become defective within the warranty period, please contact the customer service at customerservice-Amrobt@ outlook.com to resolve the issue.
Model: SI-350 E-mail: customerservice-Amrobt@outlook.