Owner's Manual

EN-9
USB functions(ash memory type)
1. USB ash memory 2 in 1 support
2. FAT 12/FAT 16/FAT 32 format supported.
3. USB 1.1 support, USB 2.0 support (For
2.0,speed performance is as USB 1.1)
4. WMA les supported
5. Maximum number of MP3 les FAT 32 format
supported is 65535 les. (Maximum number
of MP3 les NTFS supported is 1000 les. )
Maximum number of folders is 999.
6. Maximum USB capacity support is 8 GB and
best performance with tracks not more than
500, and not exceeding 30 folders.
7. Not all USB devices are compatible with the
unit.
AUX mode
When radio is on, press [ ] button and rotate
the knob to display AUX FRONT/REAR. Press
the knob to enter.
When the radio is OFF but the contact and the
power are ON : If your device detected the Tele-
mute signal (ground A2), the device switch ON
automatically.
When the signal disapeared, the device switch
OFF.
nb: Control the track with the external device
When using AUX mode, only the POWER knob,
the [volume] and [ [
] button can be used.
Other functions
Timer function
If the device is switched on while the ignition
is on, it then switches off and on again
automatically with the ignition. This is provided
that the A7 contact is connected to the terminal
15/30 (après contact ou "ignition key") of the
vehicle. If the device is switched on without
the ignition by pressing "
", it switches off
again after 120 minutes to save the battery.
The device can then be switched on again with
"
".
Caution: When the radio is switched on, the
automatic antenna extends.
Therefore always switch off the device when
the situation requires it (e.g. in a station car
wash).
You can stop this function in the MENU.
Source Button
Press [ ] button and rotate the knob to
toggle the play modes. Press the knob to enter.
Password entered
Rotate the knob to select the digits, press the
knob to conrm.
If the password is incorrect, "ERROR" appears
on the display. Please enter the password
again. If the user code is lost, contact the After
Sales Service.
PWD OFF/ON: Activating/
Desactivating the security code.
When the unit is switched on, Press [ ]
button more than 2 seconds and rotate the
knob show "PASSWORDD OFF/ON". Press
and turn the knob to select "ON" or "OFF":
the password is activated or deactivated.
When set to "ON", the radio code will
be requested, you will have to enter the
password after each time you turn the
ignition from ACC OFF to ACC ON, or the
battery is disconnected (the default password
is "1111"). If you only turn off the ignition
(+15/30), the code will not be requested.
PWD NEW: Create a new password
You can set a new password for the unit:
Press [
]button more than 2 seconds and
rotate the knob show "PWD SET", rotate and
press the knob to enter your old password.
If the old password is incorrect,"ERROR"
"AGN" appears on the display, please enter
the password again.
If the old password is correctly entered,
"NEW" is displayed, enter your new
password. When "AGN" is displayed, enter
your new password again. If "SET OK" is
displayed, the code has been updated.