User Guide

490 Series Microscope
AmScope Proprietary Page 8 of 64
2.2.4 Install the Trinocular Port and C-Mount (For Trinocular Microscopes
Only)
Unscrew and remove the photo port cap from the top side of the
microscope head.
Screw in the Trinocular port
If your camera has a c-mount, insert the c-mount adapter onto
the Trinocular port. If your camera does not have a c-mount, you
can skip this step.
2.2.5 Insert Eyepieces
Remove the eyetube caps.
Place the desired eyepieces into the empty eye/ocular tubes.
Be sure to avoid touching the lenses.