Use Instructions

SL5019 Rev. A
11
• ALWAYS wear PPE when operating or handling this equipment.
• ALWAYS follow local regulations regarding proper handling and disposal of biohazard waste.
Failure to comply may cause infection and result in healthcare staff injury.
• ALWAYS clean the equipment as indicated upon initial receipt and before each use. DO NOT place the
rover within the sterile field. Failure to comply may cause infection and result in patient or healthcare staff
injury.
• CONTAMINATION HAZARD
• DO NOT collect fluids from patients being treated with radioisotopes or hazardous chemical agents.
• ALWAYS follow local regulations for safe handling, recycling, and disposal of biohazard fluid waste
and equipment. See Disposal/Recycle section.
Failure to comply may cause environmental contamination and result in injury.
• The manifold is for SINGLE PATIENT USE ONLY. DO NOT sterilize or reuse. DO NOT reuse, reprocess,
or repackage a single use device. A single use device is intended for a single use only. The single use
device may not withstand chemical, chemical vapor, or high temperature sterilization reprocessing. Design
features may make cleaning difficult. Reuse may create a serious risk of contamination and may
compromise the structural integrity of the device resulting in operational failure. Critical product information
may be lost if the device is repackaged. Failure to comply may lead to infection or cross-infection and result
in patient or healthcare staff injury.
• ALWAYS make sure rover power is ON when collecting fluid waste. The rover can only detect full canister
if the rover is ON. If the rover is OFF, biohazard waste leakage or loss of suction can occur.