Use Instructions

SL5019 Rev. A
24
The Wash Cycle View is divided into four functional sections:
1. The left section presents the internal connections of the system.
2. The middle section is the three Wash Cycle keys, for the wash cycle options, please refer to the
“Wash Cycle Options Table”.
3. The right section shows the shows a graphical presentation of the detergent volume and the
pressure of the fresh water.
4. The bottom section, from the left to the right is the manifold socket door, the upper chamber light,
the IV pole, the upper and Lower Chamber access doors, and the UV light soft keys. For the
definitions of these soft keys, please refer to the Main View section.
Popup View
The popup view indicates an action you need to take to continue the procedure. Depending on the
situation, the popup view can contain multiple options as soft keys or only one option for
acknowledging the situation (for example, Confirm). The popup view disappears when you select one
of the soft key options.
The device provides visual and audible alarm signals when an error condition is present. For the
error conditions and informative messages and the actions to be taken, see the "Error" section.
Popup Notification Message
Popup Notification Description Action
Used Manifold!
Please replace with a new one.
Manifold has been used.
Replace manifold.
Please close the Manifold socket. Manifold has been taken out. Tap the left arrow icon
to close the Manifold