Use Instructions
Table Of Contents
- Introduction
- Indications For Use
- Contraindications For Use
- For Use With
- Accessories
- System Overview
- User/Patient Safety
- Features
- Physical Buttons
- Graphical user interface
- Definitions
- Instructions
- Inspection and Maintenance
- Cleaning
- Storage and Handling
- Disposal/Recycle
- Troubleshooting
- Error Messages
- Specifications
- Electromagnetic Compatibility
- Appendix
SL5019 Rev. A
30
a. Tap the "Smoke Evacuator" key (Figure 9) or Depressing and releasing the footswitch (if connected).
Figure 9 To Test Smoke Evacuation Figure 10 To Adjust Smoke Evacuation
b. Tap the "Smoke Evacuator Power Setting" key to input or use the " Smoke Evacuator Power Setting" bar to
adjust the smoke evacuator power. Make sure the smoke evacuation functions correctly. If not, see the
Troubleshooting section.
NOTE: See the “To Adjust the Rover Settings” section to make setting changes as required.
4. To Test the IV Pole
Tap the UP and DOWN ARROW of the IV Pole to control the IV pole (Figure 11). Make sure the IV pole
functions correctly. If not, see the Troubleshooting section.
Figure 11 To Test IV Pole
5. To Test the Chamber access doors
Tap the Upper and Lower Chamber access door keys that control the Chamber access doors (Figure 12). Make
sure the Upper and Lower Chamber access door functions correctly. If not, see the Troubleshooting section.