Use Instructions
Table Of Contents
- Introduction
- Indications For Use
- Contraindications For Use
- For Use With
- Accessories
- System Overview
- User/Patient Safety
- Features
- Physical Buttons
- Graphical user interface
- Definitions
- Instructions
- Inspection and Maintenance
- Cleaning
- Storage and Handling
- Disposal/Recycle
- Troubleshooting
- Error Messages
- Specifications
- Electromagnetic Compatibility
- Appendix
SL5019 Rev. A
41
Figure 30 To Shutdown Suction
d. Push the pop the manifold out Button until the manifold is unlocked, then pull the manifold and attached
suction tubing out of the receptacle, always keeping the manifold in a horizontal orientation (Figure 31).
Figure 31 To Release Manifold Figure 32 To Remove Manifold and Tubing
e. Properly dispose of the used manifold and attached suction tubing always maintaining the manifold in a
horizontal orientation (Figure 32).
f. Remove all the remaining fluid suction accessories as required.
g. Close the Manifold door by tapping the Manifold door left icon on the user interface
2. To Remove Smoke Evacuation Components
a. Tap the key that appears like a fan on the Touch screen or depressing and releasing the footswitch (if
connected) to stop smoke evacuation.
b. Remove the smoke evacuator tubing with any attachments.
Figure 33 To Remove Smoke Evacuation Components.