Use Instructions
Table Of Contents
- Introduction
- Indications For Use
- Contraindications For Use
- For Use With
- Accessories
- System Overview
- User/Patient Safety
- Features
- Physical Buttons
- Graphical user interface
- Definitions
- Instructions
- Inspection and Maintenance
- Cleaning
- Storage and Handling
- Disposal/Recycle
- Troubleshooting
- Error Messages
- Specifications
- Electromagnetic Compatibility
- Appendix
SL5019 Rev. A
42
3. To Remove IV Pole Components
a． Tap the IV POLE DOWN key to lower the IV pole.
b．
Remove any irrigation bags on the IV pole as required.
Figure 34 To Remove IV Pole Components
4. To Remove Power
a． Turn off the 4.5-liter chamber light by tapping the 4.5-liter light key on the user interface, if required.
b．
Close the chamber access doors by tapping the chamber access door keys on the user interface, if required.
c． Push the power switch to the OFF position.
d．
Disconnect the rover from facility electrical power. Wrap the power cord around the cord bracket.
Figure 35 To Remove Power
5. To Prepare for Relocation
NOTE: Before relocation, remove all irrigation bags from the rover. The rover transport configuration is illustrated
in Figure 36.
a. ALWAYS wipe down the rover between each surgical use. See the Cleaning section.
b. Unlock the four casters of the rover and relocate the rover as required.