Use Instructions
Table Of Contents
- Introduction
- Indications For Use
- Contraindications For Use
- For Use With
- Accessories
- System Overview
- User/Patient Safety
- Features
- Physical Buttons
- Graphical user interface
- Definitions
- Instructions
- Inspection and Maintenance
- Cleaning
- Storage and Handling
- Disposal/Recycle
- Troubleshooting
- Error Messages
- Specifications
- Electromagnetic Compatibility
- Appendix
SL5019 Rev. A
48
Figure 40 To wipe down the rover
3. Using a clean cloth moistened with disinfectant, wipe all surfaces. Make sure all surfaces remain visibly wet
at room temperature for at least the minimum time specified in the instructions supplied by the disinfectant
manufacturer.
4. Remove any excess disinfectant solution using a soft, lint-free cloth moistened with water if required by the
instructions supplied by the disinfectant manufacturer.
5. Inspect the rover. See the Inspection and Maintenance section.
6. If the rover will be used again, use the rover handle to Tap and relocate the rover. See the To Setup the
Rover section. If the rover will no longer be used, use the rover handle to Tap and relocate the rover to a
storage area.
Storage and Handling
CAUTIONS：
• ALWAYS store and transport the equipment within the specified environmental condition values throughout
its useful life. See the Specifications section.
• ALWAYS call AMSINO iReceptal 3 Customer Service before transporting or storing this equipment in
freezing conditions. Failure to comply will cause the expansion of frozen internal fluid to damage the
equipment.
To ensure the longevity, performance and safety of this equipment, use of the original packaging material is
recommended when storing or transporting this equipment.
Disposal/Recycle
WARNINGS：
BLOODBORNE PATHOGEN AND CONTAMINATION HAZARDS
• ALWAYS follow local regulations for safe handling, recycling, and disposal of biohazardous fluid waste and
iReceptal digital surgical suction equipment.