Barcode Label Printer User's Guide 400

User's Guide 9
INSTALLATION AND CONFIGURATION
Figure 3 - Switches, Indicators and Connections
Finding a Location for the Printer
Before setting up the printer you should first consider the following:
♦ Find a solid flat surface with adequate room for the printer. Make sure there is enough room
on the top side for the media and ribbon access.
♦ The location should be near the host or terminal. Consider the distance between host and
printer for the communication cable (serial or parallel cable)
♦ The power adapter should be connected to a properly grounded and isolated electrical outlet.
♦ Away from direct sun, extreme temperatures, humidity dust and debris.
Power LED
Ready LED
Feed button
Serial Port
Power Jack
Parallel Port
On Switch