User`s guide

User's Guide 20
5. Unwrap the ribbon and place the Ribbon Supply Roll on the Ribbon Supply Spindle
located towards back of printer.
Figure 12 - Ribbon Take-Up Core
6. Place the Ribbon Take-up core on the Ribbon Take-Up Spindle
located towards the front
of the printer.
7. Slide both cores completely towards the center of the printer.
8. Route the ribbon under the print mechanism.
9. Important: Route ribbon under and around back of Ribbon Take-Up Core before
attaching using tape or adhesive leader.
10. Tighten ribbon by manually rotating the Take-up Core counter-clockwise.
Figure 13 - Ribbon Routing
Supply Roll and Supply Spindle
Empty Take-up core
Take-up Spindle
Front of Printer
Ribbon Take-Up Roll
Ribbon Supply Spindle
Ribbon Take-Up Spindle
Ribbon Supply Roll