User`s guide

User's Guide 37
Setup Feature and Value List (continued)
Vert Print Align [ -0.50 - +0.50 ] (Inches) Adjust to move printed image up
or down on label. Positive
values move image up.
Negative values move image
down.
Horz Print Align [ 0.00 - 1.00 ] (Inches) Adjust to move printed image
left or right. Larger values move
the image to the right.
Vert Size Adjust [ -60 - + 60 ] Vertically expands or
compresses print image.
Negative values are
compressed, positive values are
expanded.
Print Darkness [ -12 - +12 ] Adjust for optimal print
darkness. Positive values are
darker.
Print Speed [ 2, 3, 4, 5, 6] (IPS) Adjusts print speed.
Interface Select [ Parallel Only, Serial Only, Auto
Select ]
Selects active interface while
ignoring non-selected interface.
Setting to Auto Select enables
both interfaces and performs
automatic port arbitration.
COM1: Baud Rate [ 1200, 2400, 4800, 9600, 14400,
19200, 38400, 57600 ]
Set to match host.
COM1: Parity [ None, Odd, Even ] Set to match host.
COM1: Data Bits [ 7, 8 ] Set to match host.
COM1: Handshake [ RTS, XON/XOFF, RTS & XON,
None ]
Set to match host.
COM1: PAL Xmit [ Enabled, Disabled ] Enables or disables
transmission of PAL messages
over serial interface.