User manual

8
Profile Select Feature via Serial/Parallel Port
The
Par
allel
P
o
rt
feature (Par Prt Off) specifies which profile is automatically selected
when a new print job is received on the parallel interface.
Ex. To select profile 1 (renamed Checks) when data is received on the parallel port:
Par Prt Checks
The
Ser
ial
P
o
rt
feature (Ser Prt Off) specifies which profile is automatically selected
when a new print job is received on the serial interface.
Ex.
To select profile 2 ( renamed Invoices) when data is received on the serial port:
Ser Prt Invoices
Display:
"Ser Prt Invoices"
or
"Par Prt Checks"
Description:
This feature allows the user to specify the default profile for each of the
communication interfaces. At the start of a print job, the printer checks to
ensure that the default profile associated with the active communication
interface matches the active profile. If not, a tear off occurs, the default
profile is selected, the form is parked, and a new form will be loaded from
the paper path associated with the newly selected profile.
Range:
OFF
Profile 1
Profile 2
"
"
<Max Profiles>
Default:
OFF
If this feature is set to OFF, the communications interface profile selection feature will be
ignored.
DPCL Sequence:
Parallel Port Sequence: ESC $ $ E 1 . I 3 4 ; <n> . X .
Serial Port Sequence: ESC $ $ E 1 . I 3 3 ; <n> . X .
Where <n> is 0(off) to max profiles.