User`s guide

58 User Manual
Label Formatting commands
These commands are used to format the printed label.
:nnnn Sets cut amount (see cnn command)
An Sets logical image printing mode
Cnnnn Sets left margin
cnn Sets cut amount (valid with cutter is installed)
Dwh Sets width and height pixel size
E Ends job and exits Label Formatting mode
G Stores previous data to global register
<STX>Sn Retrieves the global register contents
Hnn Sets heat value
M Toggles the mirror mode
m Sets unit of measure to metric
n Sets unit of measure to inches
Pn Sets print speed
Qnnnn Sets the quantity of labels to print
Rnnnn Sets vertical offset
rmnn..nn Retrieves label data from printer buffer
smnn..nn stores label data to printer buffer
Tnn sets end-of-line code
z Toggles slash zero to normal zero
+nn Makes auto increment for numeric
>nn Makes auto increment for alphanumeric
-nn Makes auto decrement for numeric
^nn Sets count amount
<STX>T<string> Prints date and time
Image Editing Commands
Rthvoooyyyyxxxx[data string] Text (t - font type)
Rthvoooyyyyxxxx[data string] Barcode (t- barcode type)
RX11000yyyyxxxxLaaabbb Line drawing
RX11000yyyyxxxxlaaabbb Line drawing
RX11000yyyyxxxxBaaabbbtttsss Box Drawing
RX11000yyyyxxxxbaaabbbtttsss Box Drawing
1Y11000yyyyxxxxnn…nn Graphics
Font Downloading command
<ESC>*c###D Assigns soft font ID number
<ESC>)s###W Downloads font descriptor
<ESC>*c###E Sets character code
<ESC>(s###W Downloads character descriptor and image