User`s guide

Front Panel Set-up Menu

The Set-up menu is a list of printer features that affect the basic operation of the printer.

These are functions that may not normally be selected using software commands.

Value settings that are changed using the keypad are stored into memory and are

retained when power is cycled. Value settings that are changed using software

commands are temporary changes and are not retained when power is cycled.

LCD and Button functionality in Set-up mode

Set-up Mode

Buttons

Function

PAUSE

Press PAUSE to take printer off- line with READY LED

blinking.

FEED + PAUSE

(release buttons)

Enters into set-up mode and displays feature.

FEED + PAUSE

Press and hold down FEED button. Press PAUSE button

repeatedly to scroll to the next feature.

FEED + CANCEL

Press and hold down FEED button. Press CANCEL button

repeatedly to scroll to the previous feature.

CANCEL

Pressing this key will select the displayed feature.

FEED + PAUSE

Press and hold down FEED button. Press PAUSE button

repeatedly to scroll to the next value.

CANCEL

Pressing this key will select the displayed value.

PAUSE

Press PAUSE twice to exit set-up mode and ready printer.

LCD Displayed Information

Below is an example of a typical displayed Feature.

Feature name: PRINT MODE (blinking when selected)

Feature Value: DIRECT THERMAL (chosen print mode)

Stored indicator: * (selected and saved)

PRINT MODE

DIRECT THERMAL *