User`s guide

Troubleshooting

Normally, if the printer is in not working properly, the "READY" LED blinks

continuously, and printing and communication between the host and printer

stops.

LED and LCD Diagnosis

Blinking LEDs indicate a problem. Check the LEDs and the LCD display and

refer to the following solutions:

Media Problems

LED/LCD

Indication

READY and MEDIA LEDs

Blinking

LCD Display

MEDIA OUT

Possible Problems

Solutions

Remarks

Mis-detected gap

Check the media path

Check the position of the

label sensor

For continuous media, check

application and driver, and

select continuous media.

Media out

Supply the media roll

Media not installed

Install the media roll

Media jam

Recover the jam

Note: If problem continues perform a label sensor calibration.