User`s guide

80
Barcode Reader
To use the printer in stand-alone operation with a barcode reader (scanner),
follow the procedure described below
1. Make a form for barcode reader. (Note that the form name must be
“READER” The form should include “ZS” command to store to flash
memory.)
2. Turn on the printer; download the form from PC to printer.
3. Set the parameter of “READER INSTALLED” on the LCD to ON position.
4. Turn off the printer.
5. Connect the barcode reader to the keyboard interface.
6. Turn on the printer.
7. Check LCD for instructions of each data string and scan barcodes to input
data accordingly.