Operator`s manual

4.5.19: Spring-loaded Idler Pulley Removal and Replacement - Figure 4.8.
1. Remove top cover (see Paragraph 4.5.1).
2. Remove left carriage drive cable (117) (see Paragraph 4.5.18).
3. Rotate, spool (pulley) (119) on carriage motor clockwise until carriage rests against
the right endplate (82).
4. Remove brace from idler arm and allow spring to contract.
5. Remove two screws (131) securing the front right-angle bracket (139) to the left
endplate (144) and remove bracket (139).
Figure 4.8: Spring Loaded Idler
4-19