Specification Sheet

®
A Gorman-Rupp Company
Manufacturer of AMT & IPT Pumps
400 Spring Street • Royersford, PA 19468 USA
www.amtpump.com • 888-amt-pump (268-7867)
The Gorman-Rupp Company reserves the right to discontinue any model or change specifications at any time without incurring any obligation.
©2012 American Machine and Tool Company. All rights reserved.
SPE-18
®
A Gorman-Rupp Company
Self-Priming Sewage/Trash Pumps
0913
Standard Features
• Cast Iron Construction for Abrasive Resistance and Durability
• Silicon Carbide/Viton
®
Mechanical Seal
• Built-in Buna-N Check Valve
• Buna-N O-ring Casing Seal Reusable After Clean Out
Maintenance
• Self-Cleaning Stainless Steel Impeller Resists Clogging
and Wear
• Pull-from-Rear Design Permits Clean Out and Repair Without
Removing Piping
• 3" & 4" Models Feature Front Cleanout
Pump Dimensional & Specification Data
DIS*A** BC** DEFGJ**K W**HL**SUC*HPModel
Ship Wt.
(Lbs.)
316B-95
223 8.8 [22.3]2.4 [6.1]11.1 [28.2]6.1 [15.4]3.1 [7.8]4.8 [12.2]4.0 [10.1]3.8 [9.6]2.1 [5.3]2.5 [6.3] 94
316A-95
8.8 [22.3]32 2 2.5 [6.3] 2.1 [5.3] 3.8 [9.6] 4.0 [10.1] 4.8 [12.2] 3.1 [7.8] 6.1 [15.4] 11.1 [28.2] 2.4 [6.1] 87
393B-95
52 2 3.8 [9.6] 2.1 [5.3] 5.5 [13.9] 5.2 [13.2] 4.8 [12.2] 3.1 [7.8] 6.9 [17.5] 14.8 [27.6] 4.4 [11.1] 10.0 [25.4] 189
393A-95
52 2 3.8 [9.6] 2.1 [5.3] 5.5 [13.9] 5.2 [13.2] 4.8 [12.2] 3.1 [7.8] 6.9 [17.5] 14.8 [27.6] 4.4 [11.1] 10.0 [25.4] 173
394H-95
7.5 334.3 [10.9] 3.5 [8.9] 5.5 [14.0] 6.1 [15.5] 9.0 [22.9] 8.1 [20.6] 11.8 [30.0] 19.0 [48.3] 3.7 [9.4] 15.1 [38.4] 295
394G-95
7.5 333.8 [9.7] 3.5 [8.9] 5.5 [14.0] 6.1 [15.5] 9.0 [22.9] 8.1 [20.6] 11.8 [30.0] 18.3 [46.5] 3.7 [9.4] 15.1 [38.4] 245
394F-95
10 334.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.8 [22.3] 12.5 [31.7] 19.7 [50.0] 3.7 [9.4] 15.1 [38.3] 450
394E-95
10 334.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.8 [22.3] 12.5 [31.7] 19.7 [50.0] 3.7 [9.4] 15.1 [38.3] 330
399C-95
15 444.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.8 [22.3] 12.5 [31.7] 19.7 [50.0] 3.7 [9.4] 15.1 [38.3] 350
Model CurveHPPHENC Frame
316B-95
A3
1 230 16
316A-95
3
TEFC 56J
230/460 8/4
1"
393B-95
B5
1
184JM
230 20
393A-95
3
TEFC
230/460 17/9
1"
394H-95
C7½
1 215JM 230 31
394G-95
3
TEFC
184JM 230/460 22/11
1½"
394F-95
1
TEFC 215JM
230 40
394E-95
3 230/460 26/13
1½"
399C-95
E153TEFC 215JM 230/460 47/24 2"
10D
Voltage
@ 60 Hz +
Full Load
Amps
Max
Solids
(+) 3-Phase models can also operate on
50 Hz (This will change full load amps
and service factor, RPM and priming
capabilities).
NOTE: Electric supply for
ALL motors must
be within ±10% of nameplate voltage
rating (e.g. 230V ±10%= 207 to 253).
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor
manufacturer's specifications.
NOTE:Dimensions are in inches (centimeters)
and have a tolerance of ±1/4".
20.3 [51.5]
19.9 [50.5]
27.4 [69.6]
24.9 [63.2]
30.5 [77.5]
29.0 [73.7]
34.3 [87.1]
33.4 [84.8]
33.4 [84.8]
9.3 [23.6]
9.3 [23.6]
13.4 [34.0]
12.3 [31.2]
15.5 [39.4]
13.5 [34.3]
15.5 [39.4]
14.3 [36.3]
14.3 [36.3]
• Replaceable Cast Iron Volute/Wearplate Designed for Solids Handling
• Motor Includes Stainless Steel Shaft or Stainless Steel Shaft Sleeve
• Available with 3 to 15 HP Totally Enclosed Fan Cooled (TEFC) Electric
Motors
• Single or Three Phase, 3450 RPM Motors
• Optional Mounting Base Available for 184/215 JM Frames
• Maximum Working Pressure 150 PSI
• Seal Flush Port Provided on 5 HP and Larger
• Optional Mounting Base Available
• QSP – Quick Ship Pump for Many Models
Optional Mounting Base
Model A200-90
Hazardous Duty/Xplosion Proof motors available from stock ranging from 1 to 10 HP; CALL FOR QUOTATION & LEAD TIME!
0417
DIS*A** BC** DEFGJ**K W**HL**SUC*HPModel
Ship Wt.
(Lbs.)
316B-95
223 8.8 [22.3]2.4 [6.1]11.1 [28.2]6.1 [15.4]3.1 [7.8]4.8 [12.2]4.0 [10.1]3.8 [9.6]2.1 [5.3]2.5 [6.3] 94
316A-95
8.8 [22.3]32 2 2.5 [6.3] 2.1 [5.3] 3.8 [9.6] 4.0 [10.1] 4.8 [12.2] 3.1 [7.8] 6.1 [15.4] 11.1 [28.2] 2.4 [6.1] 87
393B-95
52 2 3.8 [9.6] 2.1 [5.3] 5.5 [13.9] 5.2 [13.2] 4.8 [12.2] 3.1 [7.8] 6.9 [17.5] 14.8 [27.6] 4.4 [11.1] 10.0 [25.4] 189
393A-95
52 2 3.8 [9.6] 2.1 [5.3] 5.5 [13.9] 5.2 [13.2] 4.8 [12.2] 3.1 [7.8] 6.9 [17.5] 14.8 [27.6] 4.4 [11.1] 10.0 [25.4] 173
394H-95
7.5 334.3 [10.9] 3.5 [8.9] 5.5 [14.0] 6.1 [15.5] 9.0 [22.9] 8.1 [20.6] 11.8 [30.0] 19.0 [48.3] 3.7 [9.4] 15.1 [38.4] 295
394G-95
7.5 333.8 [9.7] 3.5 [8.9] 5.5 [14.0] 6.1 [15.5] 9.0 [22.9] 8.1 [20.6] 11.8 [30.0] 18.3 [46.5] 3.7 [9.4] 15.1 [38.4] 245
394K-95
10 334.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.1 [20.6] 11.8 [30.0] 20.0 [50.8] 3.7 [9.4] 15.1 [38.3] 360
394J-95
10 334.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 11.8 [30.0] 20.0 [50.8] 3.7 [9.4] 15.1 [38.3] 270
399D-95
15 444.3 [10.9] 3.5 [8.8] 7.0 [17.7] 6.1 [15.4] 9.0 [22.8] 8.1 [20.6] 11.8 [30.0] 20.0 [50.8] 3.7 [9.4] 15.1 [38.3] 275
Model CurveHPPHENC Frame
316B-95
A3
1 230 16
316A-95
3
TEFC 56J
230/460 8/4
1"
393B-95
B5
1
184JM
230 20
393A-95
3
TEFC
230/460 17/9
1"
394H-95
C7½
1 215JM 230 31
394G-95
3
TEFC
184JM 230/460 22/11
1½"
394K-95
1
TEFC 215JM
230 40
394J-95
3 230/460 26/13
1½"
399D-95
E153TEFC 215JM 230/460 47/24 2"
10D
Voltage
@ 60 Hz +
Full Load
Amps
Max
Solids
(+) 3-Phase models can also operate on
50 Hz (This will change full load amps
and service factor, RPM and priming
capabilities).
NOTE: Electric supply for
ALL motors must
be within ±10% of nameplate voltage
rating (e.g. 230V ±10%= 207 to 253).
(*) Standard NPT (Female) pipe thread.
(**) This dimension may vary due to motor
manufacturer's specifications.
NOTE:Dimensions are in inches (centimeters)
and have a tolerance of ±1/4".
20.3 [51.5]
19.9 [50.5]
27.4 [69.6]
24.9 [63.2]
30.5 [77.5]
29.0 [73.7]
33.6 [85.3]
32.7 [83.1]
33.7 [85.6]
9.3 [23.6]
9.3 [23.6]
13.4 [34.0]
12.3 [31.2]
15.5 [39.4]
13.5 [34.3]
15.5 [39.4]
14.3 [36.3]
14.3 [36.3]
8.1 [20.6]
Tel: [phone]
Fax: [phone]
Springer Pumps, LLC
Website: www.springerpumps.com
Int'l: +001 267 404 2910