User's Manual

7. Move to desired TP with CH on the RCU. If there are no transponder data which
you want, move to Add and press OK button.
8. Select the desired satellite. And input correct values of Frequency, Polarization and
Symbol Rate. Select the Polarization value as Hor or Ver. If you did not know accurate
polarization value select Auto.
You should find the correct data from satellite magazine or internet(http://www.SATCODX.com).
9. After all the values are input, select Search Channels and wait until the automatic
search is completed.
If FTA only is selected as YES, only free channels will be searched without scrambled
pay channels. Otherwise all channel with scrambled pay channels will be searched.
Scrambled pay channels is marked as $ at the beginning of the channel name.
After successful completion of channel searching, move to TV Channels or Radio
Channels on MAIN MENU to select currently received channels. Then you should select
the TV channel or Radio channel which you want. After then you can watch the TV
program or listen to the radio.
To find not only TP information but also all the channels from current satellite, select
Network Search.
Depending on certain TP or satellite, the Network Search function may not work.
11
Settings and Operations
Note
Note