User's Manual

2.2 Rear pannel
DIGITAL
It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish
to DIGITAL.
OUT
It sends signal to the another receiver.
RS-232C
It receives data by connecting to PC for software upgrading. Connect with RS-232C
cable a PC and receiver.
AUDIO
It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable.
VIDEO
It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
0/12 VOLT
It provides 0 or 12V output for external LNB switch.
TV ANT IN
The signal supplied to this connector from a TV antenna will be sent to TV antenna
output. Connect a TV antenna to TV ANT IN.
TV output
It provides a modulated audio and video from the receiver. Connect the TV/VCR on TV to
TV/VCR with the RF cable.
ON/OFF
The switch is to turn on or off the main power of the receiver mechanically.
4
Real pannel