User Manual

3.1 Connecting to the TV, VCR and Satellite Antenna

It is not necessary to adjust power, as the product is of free - voltage (110~220V )

1. Connect the RF cable from the TV OUTPUT on the satellite receiver to a TV and

connect the RF modulate on the VCR and the TV ANT.IN.

3. Connect an antenna to the LNB socket on the VCR or other receiver and cable of the

satellite dish to the DIGITAL on the satellite receiver.

3.2 Connecting DiSEqC switch

If you have one antenna equipped with many LNBs or two antennas with one LNB on

each, you need a DiSEqC switch.

1. Connect the LNBs to a DiSEqC switch at first.

2. Connect the antenna cable to the OUT connector on the DiSEqC switch and connect

the end of the cable to the DIGITAL on the satellite receiver.

C o n n e c t i o n s

DiSEqC switch