User Manual

35
A freeze on the system during program operation
An error occurs during program currently being used.
Solution: An error with the Windows OS. Reboot the system using the Power button.
System Not Resuming Operation
If the system will not resume operation after system operation has been suspended, check
the following possible causes:
Solution: The battery may either be defective, or discharge to a critically low level.
To correct this problem, connect an external power supply such as AC adapter.
The LCD screen is too dark or too bright
Solution: Adjust the LCD brightness. Press the hot key or Mobility Center to click on
the Brightness Up or Brightness Down.
The system can not shutdown properly
Solution: Press and hold the power button for 4~6 seconds until the system
shutdown manually.
What are the major steps to follow when the system does not turn on
properly after it shutdown
The system will turn after connecting the AC adapter; this indicates the battery is in low
status.
Solution:
 Check if the LCD screen is accidentally switch to CRT display.
 Remove the battery and reconnect the AC adapter to turn on and press on the Reset the
button to turn on the system.