User Manual

37
are using.
 What messages, if any, are on the screen?
 What software were you running at the time?
 What have you done already to try to solve the problem? If you have overlooked a step,
your dealer may be able to solve the problem over the phone.
The system could not resume after it enter the Standby mode
Solution:
 Standby Mode – allows the computer or program save into the RAM. The system will enter
the saving mode. Press any key to resume the system
 Hibernate Mode – allows the computer or program save into the HDD. At this time the
power is completely turn off. Press any key to resume the system
The system can’t resume operation
Solution:
 Malfunction of external memory or internal memory – an error will occur during saving
into the system memory, it will not execute normal operation
 External peripheral connected to the system not compatible – such as external USB devices,
compact flash, MMC, Smart Media are complicated devices will easily cause the computer
to enter standby mode thus unable to resume operation
 Operating System loses effect – the power saving mode of Microsoft operating system
adopt ACPI mode (advanced Configuration and Power Interface), the power scheme will be
handle by the OS thus affecting the power saving mode of the system
Battery problem
Charge the battery immediately as it enter the battery low status; system
can’t re-charge
Solution: To protect the battery, it is not recommended to charge the battery under
high temperature. The system battery will automatically charge when the battery